












$ 22
4.9 (679)
In stock
Arrives by Tomorrow
.
Order within 00 hr 00 min
Save $4.40 off this item after joining.
Description
(Illustration 6) The resulting surface tension will allow easier detection of damaged fibers or cuts. Follow this procedure along the entire length of the webbing, inspecting both sides of each strap. Step 2: D-Rings Check D-rings for distortion, cracks, breaks, and rough or sharp edges. Inspect for any unusual wear, frayed, or cut fibers, or broken stitching of the D-ring attachments. If inspection reveals any defect, inadequate maintenance, or unsafe condition, remove Cross Arm Anchor Strap from service immediately. The 4’ length weighs just 1.2 lbs. EASY INSTALL When working with temporary anchors, they should be easy to install. These anchors can be installed in minutes by looping the strap around a beam and threading the smaller D-Ring through the larger D-Ring. Sometimes it’s hard to anchor safely to a surface without leaving holes that must be filled after removal of the anchor, but these anchors are reusable with dual reinforced webbing and heavy duty stitching and leave no lasting damage. PREMIUM BENEFITS: • Increased Durability with Dual Reinforced Webbing and Heavy Duty Stitching • Equipped with a Heavy Duty Wear Pad to Help Protect the Structural Webbing Against Abrasions and Snags • Malta Dynamics’ Signature Orange Color Increases Visibility • Standard Size D-Ring and Large D-Ring for Easy Pass-thru and Installation · Webbing Material: Polyester · D-Ring Material: Alloy Steel · A6350 Weight: 1.2 lbs. · A6351 Weight: 1.5 lbs. CERTIFICATIONS: · OSHA 1910 & OSHA 1926 Subpart M · ANSI Z359.1-2007 & ANSI A10.32-12 SAFETY & VERSATILITY: The Malta Dynamics Cross Arm Strap is designed with safety as the top priority, meeting and exceeding OSHA and ANSI safety standards. meets the mandatory OSHA 1910 & OSHA 1926 Subpart M regulations and ANSI Z359.1-2007 & ANSI A10.32-12 FIELD TESTED & FIELD APPROVED: Our team of experts has field tested and approved these cross arm straps, ensuring that they provide reliable and durable fall protection in real-world working conditions EASY INSTALLATION & REUSABLE: The straps are designed for easy and quick installation, with no permanent damage to the anchoring surface. They are also reusable, making them a cost-effective and sustainable option for fall protection HIGH-QUALITY MATERIALS: These cross arm straps are constructed with high-quality materials, including reinforced webbing and alloy steel D-rings, ensuring maximum strength and durability and boasts a minimum tensile breaking strength of 5,000 lbs. The standard size D-Ring and large D-Ring allow for easy pass-thru and installation, while the Malta dynamics signature orange color increases onsite visibility