Range Tour Dash Cam Hardwire Kit Mini USB,12V-24V To 5V 2.5A Car Dash Camera Charger Power Cord, 3 Cores, 4 Types / 8 Adapters And 6 Fuses, Hard Wire Kit Fuse

It's a must-have if you are using a dash cams in your car or truck. The dash cam hard wire kits connects the camera directly to the fuse box under the dashboard for continuous power from the vehicle’s battery, which makes the parking monitor of your dash cam working 24 Hour Surveillance!! Specification: Input:12-24V Output:5V Used for: Dash cam, Gps, Radar Detector and other car electronic devices. Power adapter: Low-profile mini fuse, Mini fuse, Micro 2 fuse, ATO (regular) fuse Compatible: Almost all kinds of cars and dash cams. Low Voltage & Car Battery Protection Look through other dash cam hardwire kit type c, you will find that if your device keep working 24 hours, it will drain a fresh battery in one night. This upgraded dash cam hardwire kit usb c come with a sensitive voltage sensing switch, it will monitor the car battery voltage in real time. Shielding Magnetic Ring Included Most of dash cam hardwire kit usb type c will radiate electric waves outward, which is likely to interference your radio. It can reduce the radiation and prevent FM/AM interference, preventing impulse current interference when you plug or pull it out, protecting your equipment better. You can enjoy your favorite station without losing the signal with this hard wire kit for dash cam type c. NOTE: the hardwire kit is not an RF Device Dash Cam Hard Wire Kit Type C This hard wire dash cam comes is TYPE C connector which suitable for almost of dash cams, GPS Navigator, Radar Detector. Meeting your requirement. Opening Tool The hard wire dash cam kit also comes with a opening tool, which help you hidden the cable, let your installation look more tidy Good Heat Dissipation Effect Multi-vacancy design is conducive to heat dissipation of the hardwire kits, greatly improving the service life Step1 Locate Your Fuse Box 1.Turn your car off and remove the key 2. Find your fuse box (Location of the fuse box is different in different cars) 3. Use circuit tester to test our constant fuse (A circuit that is live or hot all the time means that it constantly receives power, even when your car is parked and the engine is turned off) Step3 Connecting ground wire Connect the black ground wire to the metal of the car frame, just attached to the screw like the picture shows. Test your dash cam! Input:12V-24V; Output:5V/3A (also fits for 1A). The dash cam hardwire kit compatible with all of dash cams Car DVR, GPS Navigator, Radar Detectors and More. Also comes with Low-Profile Mini, Mini, ATO (Regular) and Micro2 fuse adapter, suitable for most cars. ❖{24 Hour Surveillance Dash Cam Hardwire Kit Type C}: The hard wire kit for dash cam with Mini, ACS, ATO, Micro2 add a circuit fuse holders. The dash cam hardwire connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. Keeps it powered even after engine off, protect your car all day ❖{Easy to Install Hardwire Kit for Dash Camera}: With the dashcam hardwire kits you don’t need for cable from car cigarette lighter socket, replace it with a permanent hidden cable. Besides, We presented clips and crowbars to help you open the car insurance box. There is also a paper installation instructions. ❖{You will get}: You will get a total length of 13ft hardwire dash cam kit.